SHENGLIDA

Drill Bit, Rock Drill
Introduction of new advanced machines and technology!

curse of the drill and rock climbing

While scaling a particularly challenging rock face, climbers may experience what is known as the “curse of the drill”. This phrase refers to the helpless feeling that ensues when trying fruitlessly to overcome the greater difficulties of the climb and having to resort to drilling holes in the surface for protection. This practice isn’t just tedious – it can lead to demotivation if progress isn’t being made as quickly as expected.

For many, the feeling of being stuck in a place of stagnation is all too familiar. Yet, when it comes to rock climbing, this experience may manifest itself in a more pronounced way due to its intense physical and psychological demands. After all, climbing requires a keen eye and an unwavering determination – two qualities that can take a hit when progress appears to slow. Thus, it is not uncommon for climbers to succumb to feelings of frustration with their performance and a subsequent lack of motivation.

Challenging climbs can be fraught with frustration, as progress is often measured in tiny steps. The “curse of the drill” is a poignant testament to this fact, warning climbers against growing disheartened when progress fails to meet expectations. It is important to treat difficult ascents with patience and dedication, as a treasure trove of success awaits those who keep pushing forward – no matter how difficult the route.

Related Product

  • CIR Series DTH Bits(Low Pressure) CIR76-76

    CIR Series DTH Bits(Low Pressure) CIR76-76

    Down-the-hole (DTH) hammer bits are used with Down-the-hole hammers for drilling holes through a wide range of rock types. In conjunction with DTH hammers, drill hammer bits are de […]

  • YT27 Air Leg Pneumatic Rock Drill Pusher Leg Rock Drill

    YT27 Air Leg Pneumatic Rock Drill Pusher Leg Rock Drill

    The YT27 air-legged rock drill is a highly efficient lightweight rock drill suitable for downward or inclined drilling in medium-hard or hard (f=8 – 18) rock with a diameter […]

  • DHD Series DTH Bits(High Pressure) DHD

    DHD Series DTH Bits(High Pressure) DHD

    high pressure drill bit is mainly used in geological exploration, coal mine, water conservancy and hydropower, highway, railway, bridge, construction and construction, etc. Advanta […]

  • Cir Series Dth Bits(Low Pressure) Cir90-90

    Cir Series Dth Bits(Low Pressure) Cir90-90

    Down-the-hole (DTH) hammer bits are used with Down-the-hole hammers for drilling holes through a wide range of rock types. In conjunction with DTH hammers, drill hammer bits are de […]

  • S250 Air Leg Pneumatic Rock Drill Pusher Leg Rock Drill

    S250 Air Leg Pneumatic Rock Drill Pusher Leg Rock Drill

    (S250 jackleg Drill) has been the preferred choice of miners who demand high performance, superior control and lasting reliability. the S250 jackleg allows operators to drill in co […]

  • S82 Air Leg Pneumatic Rock Drill Pusher Leg Rock Dril

    S82 Air Leg Pneumatic Rock Drill Pusher Leg Rock Dril

    Model S82 air-legged rock drills are heavy-duty air-legged rock drills with high efficiency and low consumption, which are especially suitable for use in the construction of railro […]

  • YT29A Air Leg Pneumatic Rock Drill Pusher Leg Rock Drill

    YT29A Air Leg Pneumatic Rock Drill Pusher Leg Rock Drill

    YT29A air-legged rock drills are heavy-duty push-leg (air-legged) rock drills with low energy consumption, which are more suitable for drilling horizontal or inclined holes in medi […]

  • YT28 Air Leg Pneumatic Rock Drill Pusher Leg Rock Drill

    YT28 Air Leg Pneumatic Rock Drill Pusher Leg Rock Drill

    The YT28 air-leg rock drill is a kind of high-efficiency, energy-saving and environmentally friendly rock drilling equipment. Compared with similar pneumatic products, the YT28 air […]

  • Taper Bits

    Taper Bits

    Taper bits, especially Tapered button bits are the most popular tapered drill bits with a wide selection of head diameters from 26mm to 48mm. With carbide buttons cold pressed on t […]


  • Post time: 2023-07-02