rotary hammer drill for rock

For those needing to make their mark in rock, there is no better tool than the mighty rotary hammer drill. Even a standard drill can’t compare when it comes to opening bigger and better holes. Whether you are boring into rock for a large borehole or to install a rail, the rotary hammer drill will accomplish the feat with ease and speed.

When it comes to picking out a rotary hammer drill, the first thing to consider is which type it should be. There are two major types of bits that can be used: SDS (slotted drive system) and standard. SDS bits are made with the specific purpose of being used in rotary hammer drills, streamlining the drilling process. Whenever possible, opt for a rotary hammer drill with SDS bits – they’ll make life simpler in the long run.

A rotary hammer drill is capable of penetrating much tougher surfaces than a regular drill due to its unique operation technique. Instead of relying on just one technique, this drill uses both percussion and rotation to create the desired hole. Percussion breaks through the surface, while rotation whisks away the leftover fragments and keeps the hole free of debris. By combining these two forces, the rotary hammer drill can make holes that are more substantial than those created with a standard drill.

For optimal safety, make sure you maintain a firm hold on the drill before beginning. Lest you be deprived of your manual control and risk a potential mishap. Start slowly at a low setting, and as you progress, gradationally up the speed of the drill’s revolution. Furthermore, a bucket of water stored in proximity will ensure that you can cool the bit while drilling, thus preventing possible breakdowns.

Be vigilant while you operate the drill to prevent your bit from boring too deep. The walls of the hole are breakable so ensure that you stay in control of the depth. In case you’re working on concrete, take intermittent pauses to clear out any dirt that accumulates in the opening.

After you have burrowed down to the level you need, take your time to gradually extricate the drill from the hole. As soon as the drill is out, you can then remove the bit and tidy up the aperture.

Working with rock? Then you’ll need a rotary hammer drill. This is the go-to tool for easily drilling through hard substances like stone. Apply the right drill bit and you can fashion openings of whatever diameter you require.

Related Product